Products
P338 Clay Yellow Sandpaper

P338 Clay Yellow Sandpaper

DMS P338 Clay Yellow Sandpaper combines mixed ceramic abrasive grains with an anti-clogging coating to support consistent cutting during automotive putty and primer sanding. Its surface treatment helps reduce dust and residue build-up, making it an option for auto body shops seeking reliable abrasive performance during repair preparation. Contact DMS for grit options, product formats, samples and bulk quotations.

    DMS P338 Clay Yellow Sandpaper is a ceramic abrasive option for auto body shops sourcing sandpaper for putty and primer work. During sanding, dust and material residue can collect on the abrasive face. When the cutting grains become covered, the product may not work as well as it did at the start. This is one reason why loading is a common concern in body repair shops.

    P338 combines mixed ceramic grains with an anti-clogging coating. The grain blend supports material removal, while the coating helps reduce the build-up of sanding dust and residue on the abrasive surface. This can help the abrasive keep cutting more steadily during use. The coating does not remove the need to choose the right grit or use the correct sanding method. It is one part of the product design.

    P338 Clay Yellow SandpaperP338 Clay Yellow Sandpaper

    When abrasive loading slows the job

    For body filler, the operator first needs to shape the repair area and remove high spots. After that, the surface needs to be refined before primer or another coating is applied. P338 can be considered for these preparation steps when the selected grit matches the work. When sanding primer, check the surface often. If deeper marks remain, use the right grit sequence before moving to the next stage.

    An anti-clogging coating is especially worth checking when your current abrasive loads up during regular work. P338 Clay Yellow Sandpaper can be compared with your current product on the same material. Use the same grit, tool, pressure and working time. Look at how much residue stays on the abrasive, whether the cutting feel changes during the test, and how the surface looks after sanding. A fair comparison gives a better view than judging the product from one short pass.

    How to make a fair product comparison

    The current product information identifies the grain blend and anti-clogging coating, but buyers should confirm the backing type, grit range and available formats before ordering. DMS can help check these details against your process. Tell us whether you mainly sand putty, primer or both, and share your disc or sheet size. Contact DMS to ask about P338 Clay Yellow Sandpaper product details, sample testing and supply options.

    Send Inquiry
    Contact Info
    If you have any enquiry about quotation or cooperation, please feel free to email us at info@dgkingdom.com or use the following inquiry form. Our sales representative will contact you within 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept