DMS Q227 Green Film combines mixed ceramic abrasive grains with a strong, tear-resistant PET film backing for automotive wet and dry sanding. Its evenly distributed abrasive grains support consistent cutting and sanding patterns during body filler shaping and primer preparation. Contact DMS for grit selections, disc sizes, samples and bulk supply quotations.
DMS Q227 Green Film is a ceramic film sandpaper for repair shops looking to source a water-resistant abrasive for wet and dry sanding. In collision repair, the surface can change from one stage to the next. A product used for shaping filler may not be the best choice for refining primer. The abrasive should cut at a suitable rate and leave marks that can be removed in the next step.
Q227 combines mixed ceramic grains with a strong PET film backing. The ceramic grains support sharp cutting. Their even distribution helps create a more consistent sanding pattern across the work area. This matters because uneven sanding marks can take extra time to remove later. The PET film backing is strong and resists tearing during normal sanding work, giving the product a durable base.
Film backing and sanding marks
Q227 can be used for both wet and dry sanding. This gives the operator a choice based on the repair process and workshop practice. When working dry, use suitable dust control and check the abrasive surface as you go. When working wet, follow the correct process for the material and coating being sanded. The product choice should always match the surface, grit and next repair step.
For body repair, Q227 Green Film can be considered when a shop wants a film-backed abrasive for common sanding tasks. Start by matching the grit to the amount of material to remove. Use even pressure and keep the sander moving. After sanding, inspect the panel under good light. Look for deep marks, missed areas and uneven spots before moving to the next stage.
Match the method to the repair process
If you are comparing Q227 with another film abrasive, test both on the same panel or material. Keep the grit, tool, pressure and sanding time the same. Record the cutting feel, sanding pattern and any damage to the backing. DMS can help you check the available Q227 sizes and grit options for your market. Contact us to discuss Q227 Green Film, your repair process, sample options and a quotation.
If you have any enquiry about quotation or cooperation, please feel free to email us at info@dgkingdom.com or use the following inquiry form. Our sales representative will contact you within 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy