Products
H04A PyraGloss Pyramid Foam Abrasive
  • H04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam Abrasive
  • H04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam Abrasive
  • H04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam Abrasive
  • H04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam Abrasive

H04A PyraGloss Pyramid Foam Abrasive

DMS H04A PyraGloss Pyramid Foam Abrasive features a three-dimensional pyramid abrasive structure and soft sponge backing for fine automotive surface finishing. Designed to refine previous sanding marks and follow curved panels and shaped areas, it helps prepare surfaces for polishing with controlled abrasive contact. Contact DMS for grit options, product formats, samples and bulk quotations.

    DMS H04A PyraGloss Pyramid Foam Abrasive is a finishing product for repair shops looking to source a soft abrasive for sanding before polishing. After the main sanding steps, fine marks may still remain on the surface. The last sanding stage needs care. The aim is to refine those marks and prepare the panel for polishing without removing more material than needed.

    H04A uses a three-dimensional pyramid abrasive structure. This structure gives the abrasive a raised pattern rather than one flat grain surface. It is designed to help refine marks left by earlier sanding steps and create a more even finish. The exact result depends on the previous grit, the condition of the surface and the way the operator uses the product. It should be tested as part of the full sanding process.

    H04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam AbrasiveH04A PyraGloss Pyramid Foam Abrasive

    The role of a 3D abrasive structure

    The abrasive is built on a soft sponge backing. The sponge can follow curved panels and shaped areas more easily than a hard, flat backing. This helps the operator keep contact with the surface around curves and body lines. It also gives a softer feel during fine sanding. When working on a curved panel, use controlled pressure and avoid pushing hard on edges or raised areas.

    H04A PyraGloss Pyramid Foam Abrasive is intended for fine sanding before polishing. It is not a replacement for the earlier steps that shape filler or remove deep sanding marks. Start only after the surface has been prepared with the right grit sequence. Sand the area evenly, clean it and inspect the result under good light. If deeper marks are still visible, return to the suitable earlier step rather than expecting a fine finishing abrasive to remove them quickly.

    Prepare the surface before polishing

    For a fair test, use H04A on a panel that has already been sanded through your normal process. Record the previous grit, the H04A grit and the polishing result. This helps show where the product fits in your work. DMS can help you confirm the suitable H04A grade and format. Contact us to discuss H04A PyraGloss Pyramid Foam Abrasive, your finishing process, sample options and a quotation.

    Send Inquiry
    Contact Info
    If you have any enquiry about quotation or cooperation, please feel free to email us at info@dgkingdom.com or use the following inquiry form. Our sales representative will contact you within 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept